User manual

The batteries are not included in the scope of delivery.
1. Loosen the screw of the battery compartment cover using a cross-head screwdriver.
Remove the cover.
2. Insert the batteries (4 × NiMH, AAA, rechargeable) into the battery compartment. Pay
attention to the correct location of the poles.
3. Replace the battery compartment cover. Tighten the cover.
Use the included power adapter for charging the inserted batteries.
Connect the supplied mains adapter to the power supply input of the device and then
plug the adapter into an AC outlet.
ð
The batteries are being charged. The LED [Normal] lights when the batteries are fully
charged.
Charging the batteries
Installation and starting up
Dr. RDM I DMX RDM Tester
15
controller