User manual Dr.
Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 06.03.
Table of contents Table of contents 1 General information................................................................................................................................. 6 1.1 Further information........................................................................................................................... 7 1.2 Notational conventions.................................................................................................................... 8 1.
Table of contents 4 Dr. RDM I DMX RDM Tester controller 7 Technical specifications....................................................................................................................... 74 8 Plug and connection assignment.................................................................................................... 76 9 Protecting the environment..............................................................................................................
Dr.
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Displays Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’ , ‘OFF’ . 8 Dr.
General information Instructions The individual steps of an instruction are numbered consecutively. The result of a step is indented and highlighted by an arrow. Example: 1. Switch on the device. 2. Press [Auto]. ð Automatic operation is started. 3. Cross-references Switch off the device. References to other locations in this manual are identified by an arrow and the specified page number. In the electronic version of the manual, you can click the cross-reference to jump to the specified location.
General information 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided.
Safety instructions 2 Safety instructions Intended use This device is for testing devices that are controlled via DMX, RDM or MIDI or output these sig‐ nals. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or prop‐ erty damage. No liability will be assumed for damages resulting from improper use.
Safety instructions NOTICE! External power supply The device is powered by an external power supply. Before connecting the external power supply, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual cur‐ rent circuit breaker. Failure to do so could result in damage to the device and pos‐ sibly the user.
Features 3 Features n n n n n Universal test device for DMX, RDM and MIDI networks 5-pin DMX in and output MIDI input Plug-in power supply and adapter for 3-pin DMX plug included Operating via buttons and display on the unit Dr.
Installation and starting up 4 Installation and starting up Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. Create all connections while the device is off. Use the shortest possible high-quality cables for all connections.
Installation and starting up The batteries are not included in the scope of delivery. 1. Loosen the screw of the battery compartment cover using a cross-head screwdriver. Remove the cover. 2. Insert the batteries (4 × NiMH, AAA, rechargeable) into the battery compartment. Pay attention to the correct location of the poles. 3. Replace the battery compartment cover. Tighten the cover. Charging the batteries Use the included power adapter for charging the inserted batteries.
Connections and controls 5 16 Connections and controls Dr.
Connections and controls 1 Jog Wheel for control and menu selection 2 Display The display is turned off after an adjustable period of time without keystroke. Press the jog wheel to reactivate the display. 3 [DMX/RDM OUT] 5-pin DMX / RDM output 4 [DMX/RDM IN] 5-pin DMX / RDM input 5 [MIDI IN] MIDI input 6 [Power Switch] Main switch. Turns the device on and off. 7 [PWR] The LED indicates that the device is switched on. Dr.
Connections and controls 8 [Program Update] Micro SD slot 9 [Under Voltage] This LED lights up when the supply voltage is too low. 10 [Normal] The LED indicates that the supply voltage is within the permissible range. 11 [DC INPUT] Connector for the supplied power supply adapter. 18 Dr.
Operating 6 Operating The device can be powered by batteries or with the included AC adapter. Use with batterie: Insert the batteries into the device. Ä ‘Inserting batteries’ on page 14 Use with power adapter: Connect the supplied mains adapter to the power supply input of the device and then plug the adapter into an AC outlet. Dr.
Operating 6.1 Main menu Selection in main menu 20 Dr. RDM I DMX RDM Tester controller 1. Turn the jog wheel to highlight a menu item. 2. Press the jog wheel to select the highlighted menu item. 3. Press the jog wheel again to open the associated submenu. 4. The display shows the available elements of the submenu. 5. Select the menu item ‘EXIT’ and press the jog wheel to return to the main menu.
Operating 6.2 DMX 512 test This menu allows you to monitor the data packets being received by DMX-controlled devices or sending test data to the devices. Dr.
Operating 1. Select the item ‘DMX-512 TEST’ from the main menu. 2. Press the jog wheel to open the respective submenu. ð The display shows: 3. 22 Dr. RDM I DMX RDM Tester controller Select one of the submenus ‘DMX Packet Test’ , ‘DMX Data Receive’ or ‘DMX Data Send’ .
Operating DMX packet test 1. Select the item ‘DMX Packet Test’ from the submenu ‘DMX-512 Test’ . 2. Press the jog wheel to open the respective submenu. ð If the wiring is correct and a DMX signal is received, the display shows the following values: If no signal is received, the display shows: Dr.
Operating In this case, check the wiring and the correct fit of the connectors. 3. 24 Dr. RDM I DMX RDM Tester controller To return to the parent menu, select ‘EXIT’ and press the jog wheel to confirm.
Operating Analysis of received DMX data 1. Select the item ‘DMX Data Receive’ from the submenu ‘DMX-512 Test’ . 2. Press the jog wheel to open the respective submenu. ð The display shows: It will display the received DMX value ( ‘000’ … ‘255’ ) for every 25 channels. 3. To change the first displayed channel, use the jog wheel to select ‘Start’ and press the jog wheel. Turn the jog wheel until the number of the desired channel appears at ‘Start’ . Press the jog wheel to confirm. Dr.
Operating 4. To change the display format, use the jog wheel to select ‘Format’ and press the jog wheel. Turn the jog wheel to select one of the following formats. n n n n n n ‘DEC’ : Decimal values ‘PER’ : Percentage values ‘BAR’ : Bars of squares ‘RGB’ : Squares with RGB colour mixing ‘BRG’ : Squares with BGR colour mixing ‘HEX’ : Hexadecimal values Press the jog wheel. 5. 26 Dr. RDM I DMX RDM Tester controller To return to the parent menu, select ‘EXIT’ and press the jog wheel to confirm.
Operating Analysis of transmitted DMX data 1. Select the item ‘DMX Data Send’ from the submenu ‘DMX-512 TEST’ . 2. Press the jog wheel to open the respective submenu. ð The display shows: 3. Select the item ‘Single Channel Mode’ from the submenu ‘DMX-512 SEND’ . 4. Press the jog wheel to open the respective submenu. ð The display shows: Dr.
Operating 5. To select the channel on which the data should be sent, select the item ‘Channel’ . Press the jog wheel. Use the jog wheel to set a value between 1 and 512 – or ‘All’ for transmis‐ sion on all channels. 6. To select an operating mode, select ‘Mode’ . Press the jog wheel. Use the jog wheel to select one of the following options: ‘Fader Only’ : The transmitted DMX value can be adjusted between 0 and 255 with the jog wheel.
Operating n ‘Stop’ : The transmitted DMX value can not be changed 7. To select the value range of the data transmitted, select the item ‘Channel Level’ . Press the jog wheel. Use the jog wheel to set a value between 0 and 255. 8. To set the rate of change, select ‘Speed’ . Press the jog wheel. Use the jog wheel to set a value between ‘level 0’ and ‘level 10’ . 9. To return to the parent menu, select ‘EXIT’ and press the jog wheel to confirm. 10.
Operating 12. To change the first channel for which DMX values are to be sent, use the jog wheel to select ‘Start/Channel’ and press the jog wheel. Turn the jog wheel until the number of the desired channel appears at ‘Start’ . Press the jog wheel to confirm. 13. To set the transmitted DMX value in the range 0 to 255, first select the value with the jog wheel. Press the jog wheel. Set the desired value with the jog wheel. Press the jog wheel. 14.
Operating n n ‘BAR’ : Bars of squares ‘HEX’ : Hexadecimal values Press the jog wheel. 15. To reset the transmitted DMX value, use the jog wheel to select the item ‘All Reset’ and press the jog wheel. 16. To return to the parent menu, select ‘EXIT’ and press the jog wheel to confirm. 17. Select the item ‘Color Demo Mode’ from the submenu ‘DMX-512 SEND’ . 18. Press the jog wheel to open the respective submenu. ð The display shows: Dr.
Operating 19. Use the jog wheel to select the setting to be changed and press the jog wheel. Turn the jog wheel to select or adjust a value. The following table shows the menu items and choices. Menu item Choices Meaning ‘Pixel Type’ ‘8Bit’ , ‘16Bit’ Resolution of connected devices ‘Start Channel’ ‘1’ … ‘512’ First channel for which DMX values are to be sent ‘Master Level’ ‘0’ … ‘255’ Maximum DMX value 32 Dr.
Operating Menu item Choices Meaning ‘Speed’ ‘Level0’ … ‘Level10’ Running speed ‘Fade Time’ ‘0 %’ … ‘100 %’ Fade time 20. To return to the parent menu, select ‘EXIT’ and press the jog wheel to confirm. 21. Select the item ‘Chase Demo Mode’ from the submenu ‘DMX-512 SEND’ . 22. Press the jog wheel to open the respective submenu. ð The display shows: Dr.
Operating 23. Use the jog wheel to select the setting to be changed and press the jog wheel. Turn the jog wheel to select or adjust a value. The following table shows the menu items and choices. Menu item Choices Meaning ‘Start Chan.
Operating 25. To return to the main menu, select ‘EXIT’ again and press the jog wheel to confirm. 6.3 RDM test This menu allows you to retrieve information about the connected RDM-controlled devices or send test data to the devices. Dr.
Operating 1. Select the item ‘RDM DATA TEST’ from the main menu. 2. Press the jog wheel to open the respective submenu. ð The display shows: 3. 36 Dr. RDM I DMX RDM Tester controller Select one of the submenus ‘Get&Set RDM Parameter’ or ‘Update RDM Device’ .
Operating Retrieve RDM parameters - Iden‐ tify Device 1. Select the item ‘Get&Set RDM Parameter’ from the submenu ‘RDM DATA TEST’ . 2. Press the jog wheel to open the respective submenu. ð The display shows: If the wiring is correct and an RDM-controlled device is found, the display shows real-time information about the device: Dr.
Operating If no signal is received, the display shows: 38 Dr.
Operating In this case, check the wiring and the correct fit of the connectors. 3. For more detailed information, use the jog wheel to select ‘Para’ . Press the jog wheel. ð The display shows: Dr.
Operating 4. The selectable parameters depend on the respective device, examples: ‘Identify Device’ , ‘Device Info’ , ‘DMX Start Address’ . 5. To retrieve a parameter, select it with the jog wheel and press the jog wheel. Select ‘Get Parameter’ and press the jog wheel. ð The display shows, for example: 40 Dr.
Operating 6. Use the jog wheel to select ‘Fresh’ to refresh the displayed information, or ‘EXIT’ to return to the parent menu. Press the jog wheel. Dr.
Operating Retrieve RDM Device Informa‐ tion - Device Info 1. Select the item ‘Get&Set RDM Parameter’ from the submenu ‘RDM DATA TEST’ . 2. Press the jog wheel to open the respective submenu. ð The display shows: If the wiring is correct and an RDM-controlled device is found, the display shows real-time information about the device: 42 Dr.
Operating If no signal is received, the display shows: Dr.
Operating In this case, check the wiring and the correct fit of the connectors. 3. For more detailed information, use the jog wheel to select ‘Para’ . Press the jog wheel. ð The display shows: 44 Dr.
Operating 4. The selectable parameters depend on the respective device, examples: ‘Identify Device’ , ‘Device Info’ , ‘DMX Start Address’ . 5. To retrieve a parameter, select it with the jog wheel and press the jog wheel. Select ‘Get Parameter’ and press the jog wheel. ð The display shows, for example: Dr.
Operating 46 Dr. RDM I DMX RDM Tester controller 6. Use the jog wheel to select ‘More Info’ to access further parameters. 7. Use the jog wheel to select ‘Fresh’ to refresh the displayed information, or ‘EXIT’ to return to the parent menu. Press the jog wheel.
Operating Changing RDM parameters 1. Select the item ‘Get&Set RDM Parameter’ from the submenu ‘RDM DATA TEST’ . 2. Press the jog wheel to open the respective submenu. ð The display shows: If the wiring is correct and an RDM-controlled device is found, the display shows real-time information about the device: Dr.
Operating If no signal is received, the display shows: 48 Dr.
Operating In this case, check the wiring and the correct fit of the connectors. 3. To change individual parameters, use the jog wheel to select ‘Para’ . Press the jog wheel. ð The display shows: Dr.
Operating 4. The selectable parameters depend on the respective device, examples: ‘Identify Device’ , ‘Device Info’ , ‘DMX Start Address’ . 5. To retrieve a parameter, select it with the jog wheel and press the jog wheel. Select ‘Set Parameter’ and press the jog wheel. ð The display shows, for example: 50 Dr.
Operating 6. Use the jog wheel to select ‘Start Identify’ to start or ‘Stop Identify’ to stop the identifica‐ tion. Press the jog wheel. 7. To select which devices should be affected by the change, use the Jog Wheel to select ‘Only self’ and press the jog wheel. Turn the jog wheel to select one of the following for‐ mats.
Operating Press the jog wheel. 52 Dr. RDM I DMX RDM Tester controller 8. Use the jog wheel to select ‘Ok&Save’ and press the jog wheel to save the change. 9. Use the jog wheel to select ‘EXIT’ to return to the parent menu. Press the jog wheel.
Operating Display or change of the DMX address of an RDM-controlled device 1. Select the item ‘Get&Set RDM Parameter’ from the submenu ‘RDM DATA TEST’ . 2. Press the jog wheel to open the respective submenu. ð The display shows: If the wiring is correct and an RDM-controlled device is found, the display shows real-time information about the device: Dr.
Operating If no signal is received, the display shows: 54 Dr.
Operating In this case, check the wiring and the correct fit of the connectors. 3. To change individual parameters, use the jog wheel to select ‘Para’ . Press the jog wheel. ð The display shows: Dr.
Operating 4. Use the jog wheel to select ‘Para: DMX Start Address’ and press the jog wheel. 5. To display the current DMX address, select ‘Get Parameter’ and press the jog wheel. ð The display shows, for example: 56 Dr.
Operating 6. Use the jog wheel to select ‘Fresh’ to refresh the displayed information, or ‘EXIT’ to return to the parent menu. Press the jog wheel. 7. To change the DMX address, use the jog wheel to select ‘Set Parameter’ and press the jog wheel. ð The display shows, for example: Dr.
Operating 8. Use the jog wheel to select ‘Channel:’ and press the jog wheel. Set the desired value with the jog wheel. Press the jog wheel to confirm. 9. To select which devices should be affected by the change, use the Jog Wheel to select ‘Only self’ and press the jog wheel. Turn the jog wheel to select one of the following for‐ mats.
Operating Press the jog wheel. 10. Use the jog wheel to select ‘Ok&Save’ and press the jog wheel to save the change. 11. Use the jog wheel to select ‘EXIT’ to return to the parent menu. Press the jog wheel. Dr.
Operating Software update of an RDM-con‐ trolled device 1. Select the item ‘Update RMD device’ from the submenu ‘RDM DATA TEST’ . 2. Press the jog wheel to open the respective submenu. ð The display shows: If the wiring is correct and an RDM-controlled device is found, the display shows real-time information about the device: 60 Dr.
Operating If no signal is received, the display shows: Dr.
Operating In this case, check the wiring and the correct fit of the connectors. 3. Insert a micro SD card with the required software into the micro SD slot of the device. 4. Use the jog wheel to select ‘Send: Single device’ . Press the jog wheel. ð The display shows: 62 Dr.
Operating 5. To retrieve a parameter, select it with the jog wheel and press the jog wheel. Select ‘Single device’ (transmission to one device) or ‘All devices’ (transmission to all devices) and press the jog wheel. ð The software is transferred to the devices. 6. Use the jog wheel to select ‘EXIT’ to return to the parent menu. Press the jog wheel. Dr.
Operating 6.4 MIDI test This menu allows you to test the data of a MIDI-controlled device. 64 Dr. RDM I DMX RDM Tester controller 1. Connect a MIDI device to the MIDI input. 2. Select the item ‘MIDI Receive’ from the main menu.
Operating 3. Press the jog wheel to open the respective submenu. ð The display shows: Dr.
Operating After a few seconds, the ‘ACT’ indicator appears in the lower left corner of the dis‐ play. Once the data has been received from a MIDI device, the display shows: 4. To return to the parent menu, select ‘EXIT’ and press the jog wheel to confirm. 6.5 Cable test This menu allows you to test a DMX cable. 66 Dr.
Operating 1. Connect the cable to be tested to the DMX input and the DMX output. 2. Select the item ‘CABLE TEST’ from the main menu. 3. Press the jog wheel to open the respective submenu. ð The display shows: Dr.
Operating 4. Use the jog wheel to select ‘Test’ and press the jog wheel. ð After a few seconds, the display shows the test result. If all wires are correctly con‐ nected, the display shows: 68 Dr. RDM I DMX RDM Tester controller 5. To repeat the test, select ‘Try Again’ and press the jog wheel to confirm. 6. To return to the parent menu, select ‘EXIT’ and press the jog wheel to confirm.
Operating 6.6 System settings In this menu, you can adjust device settings. Dr.
Operating 1. Select the item ‘SYSTEM Setup’ from the main menu. 2. Press the jog wheel to open the respective submenu. ð The display shows: 70 Dr.
Operating Turn the jog wheel to scroll down the list: Dr.
Operating 3. Use the jog wheel to select the setting to be changed and press the jog wheel. Turn the jog wheel to select or adjust a value. The following table shows the menu items and choices. Menu item Choices Meaning ‘TX Start Code’ ‘0’ … ‘255’ Start value for the DMX data transmission. ‘RX Start Code’ ‘0’ … ‘255’ , ‘All’ This code is required if several test devices should work as trans‐ mitters. In this case, all test devices must be set to the same code.
Operating Menu item Choices Meaning ‘Backlight Off’ ‘30 sec’ , ‘1 min’ , ‘5 min’ , ‘10 min’ , ‘30 min’ Setting the time after which the display turns off automatically. ‘Auto Mask Device’ ‘ON’ A connected RDM-controlled device does not appear in the overview. If you set its DMX address, the other devices without DMX address appear in the overview. ‘OFF’ A connected RDM-controlled device appears in the overview. ‘ON’ DMX signals can also be sent in RDM mode.
Technical specifications 7 Technical specifications Control protocols DMX512, RDM, MIDI Input connections DMX/RDM control 1 × XLR panel plug, 5-pin MIDI 1 × DIN connector, 5-pin Power supply 1 × socket for connecting the power adapter Data interface 1 × micro-SD card slot Output connections DMX/RDM control 1 × XLR chassis socket, 5-pin Power supply Power adapter (9 V / 500 mA ), positive centre Battery type 4 × Ni MH, AAA, rechargeable Voltage 1.
Technical specifications Weight 0.28 kg Ambient conditions Temperature range 0 °C…40 °C Relative humidity 50 %, non-condensing Further information Accessory type DMX tester Dr.
Plug and connection assignment 8 Plug and connection assignment Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment so that a perfect light experience is guaranteed. Please take our tips, because especially in ‘Sound & Light’ caution is indicated: Even if a plug fits into a socket, the result of an incorrect connection may be a destroyed DMX controller, a short circuit or ‘just’ a not working light show! DMX connections 76 Dr.
Protecting the environment 9 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose these materials with your normal household waste, but make sure that they are fed to a recovery. Please follow the notes and markings on the packaging.
Protecting the environment Disposal of your old device This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose with your normal household waste. Dispose this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility. 78 Dr.
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
