User manual

You are in the ‘SMPTE/MTC Event’ submenu.
1.
Use or and select ‘Delete SMPTE/MTC’ .
2. Conrm the selection with [ENTER].
ð
All previously saved events are listed.
3.
Use or to select the event you want to delete and conrm with [ENTER].
4. Select ‘Finish & Return’ to exit the menu and conrm with [ENTER].
With ‘DMX Trigger’ you can control the device with the help of a DMX controller. Three chan‐
nels are required for control.
You are in the ‘DMX Trigger’ submenu.
1.
Use or to select ‘DMX Start Address’ .
2. Conrm the selection with [ENTER].
3.
Use or to select the parameters you want to edit and conrm with [ENTER].
Deleting an SMPTE/MTC Event
Creating a DMX trigger
Operating
DR-PRO Rack
43
DMX recorder