User manual

6.2.2 Triggering an event
1. Call up the ‘User Set’ menu for the user settings.
2.
Use or to select ‘Trigger Event’ .
3. Conrm the selection with [ENTER].
ð
The screen with the submenus for the selection of trigger modes appears.
You can choose from three trigger modes:
n Time Event
n SMPTE/MTC Event
n DMX Trigger
‘Time Event’ enables an automatic programme run, which is either repeated weekly or trig‐
gered on a specic date.
Example: You want to create an event that runs every day from 8:00 a.m. to 10:00 p.m. For this
you need a start event (all weekdays activated) with the time setting at 8:00 a.m. and a stop
event (all weekdays activated) with the time setting at 10:00 p.m.
Setting a Time Event
Operating
36
DR-PRO Rack
DMX recorder