User manual

Number Recording mode Function

3 Auto Automatic recording mode. Recording starts when all

DMX channels are set to 0. As long as the device

receives DMX data not equal to 0, it is in standby

mode and waits for the start of the recording. As soon

as all DMX channels are set to 0 again after the start

of the recording, the recording is stopped.

4 Smart Recording mode to create a perfect loop. Press [PLAY]

to start recording the DMX signal. As soon as the

device receives the same values as in the rst frame,

the recording is stopped.

Select ‘Start Record’ with or and conrm with [ENTER] to start recording.

The last row in the display shows the status during the recording:

‘Check DMX’ Device waits for DMX start value (automatic recording)

‘DMX Data . . .’ Recording running

Select ‘Pause Record’ with or and conrm with [ENTER].

The recording is paused.

Operating

DR-PRO Rack

DMX recorder