User manual

Proceed as follows to adjust the dimmer curve of the dimmer channels:
1. Press [MENU] to open the main menu. Press [UP] or [DOWN] to select the ‘Curve’ menu.
2. Conrm with [MENU].
ð
The display shows ‘Curve’ .
3. Use [UP] or [DOWN] to select between ‘All’ (all channels get the same dimmer curve) and
‘Single’ (each channel can get an individual dimmer curve).
Conrm with [MENU].
4. In ‘All’ mode: Use [UP] or [DOWN] to select the dimmer curve from the options:
n ‘Linear’
n ‘S Curve’
n ‘Non Dim’
n ‘Square’
Conrm with [MENU].
In ‘Single’ mode: Use [UP] or [DOWN] to rst select the channel whose dimmer curve is to
be set. Conrm with ‘MENU’ . Then select the dimmer curve for this channel from the
options:
n ‘Linear’
Setting the dimmer curve
Operating
DPX-620 III 6 Ch. Dimmer Inst.
31
dimmer pack