User manual

Proceed as follows to set the minimum brightness for the dimmer channels:
1. Press [MENU] to open the main menu. Press [UP] or [DOWN] to select the ‘MinLevel’
menu.
2. Conrm with [MENU].
ð
The display shows ‘MinLevel’ .
3. Use [UP] or [DOWN] to select between ‘All’ (all channels get the same minimum bright‐
ness) and ‘Single’ (each channel can get an individual minimum brightness).
Conrm with [MENU].
4. In ‘All’ mode: Use [UP] or [DOWN] to select the minimum brightness for all channels in a
rage 0 % … 30 %. Conrm with [MENU].
In ‘Single’ mode: Use [UP] or [DOWN] to rst select the channel whose minimum bright‐
ness is to be set. Conrm with ‘MENU’ . Then select the minimum brightness for this
channel from a range 0 % … 30 %. Conrm with [MENU] and repeat the procedure for all
channels.
5. Press [ESC] to return to the main menu.
Setting minimum brightness
Operating
30
DPX-620 III 6 Ch. Dimmer Inst.
dimmer pack