User manual

Proceed as follows to set the maximum brightness for the dimmer channels:
1. Press [MENU] to open the main menu. Press [UP] or [DOWN] to select the ‘MaxLevel’
menu.
2. Conrm with [MENU].
ð
The display shows ‘MaxLevel’ .
3. Use [UP] or [DOWN] to select between ‘All’ (all channels get the same maximum bright‐
ness) and ‘Single’ (each channel can get an individual maximum brightness).
Conrm with [MENU].
4. In ‘All’ mode: Use [UP] or [DOWN] to select the maximum brightness for all channels in a
rage 70 % … 100 %. Conrm with [MENU].
In ‘Independent – Single’ mode: Use [UP] or [DOWN] to rst select the channel whose
maximum brightness is to be set. Conrm with ‘MENU’ . Then select the maximum
brightness for this channel from a range 70 % … 100 %. Conrm with [MENU] and repeat
the procedure for all channels.
5. Press [ESC] to return to the main menu.
Setting maximum brightness
Operating
DPX-620 III 6 Ch. Dimmer Inst.
29
dimmer pack