User manual

Proceed as follows to specify how the unit behaves when the DMX signal is missing.
1. Press [MENU] to open the main menu. Press [UP] or [DOWN] to select the ‘DMX Fail’
menu.
2. Conrm with [MENU].
ð
The display shows ‘Dmx fail’ .
3. Use [UP] or [DOWN] to select between options
n ‘LastHold’ : Last setting is retained
n ‘Analog’ : The analogue control signal (input [ANALOG]) is analysed
n ‘Progr:01-12’ : The built-in automatic programmes are executed
Conrm with [MENU].
4. In ‘Progr:01-12’ mode: Use [UP] or [DOWN] to select the duration of each step (and thus
the programme speed) in the range 0.005 s … 30.0 s.
5. Press [ESC] to return to the main menu.
Device behaviour on missing
DMX signal.
Operating
28
DPX-620 III 6 Ch. Dimmer Inst.
dimmer pack