User manual

Proceed as follows to assign DMX addresses to the dimmer channels:
1. Press [MENU] to open the main menu. Press [UP] or [DOWN] to select the ‘Patching’
menu.
2. Conrm with [MENU].
ð
The display shows ‘Patching Start’ .
3. Use [UP] or [DOWN] to select between assignment mode ‘Start’ (channels are automati‐
cally addressed consecutively) and ‘Independent’ (DMX addresses are independent of
each other).
Conrm with [MENU].
4. In ‘Start’ mode: Use [UP] or [DOWN] to select the DMX address of channel 1 in a rage 1 …
512.
Conrm with [MENU].
5. In ‘Independent’ mode: Use [UP] or [DOWN] to select between ‘All’ (all channels get the
same DMX address) and ‘Single’ (each channel can get an individual DMX address).
In ‘Independent – All’ mode: Use [UP] or [DOWN] to select the DMX address for all chan‐
nels in a rage 1 … 512. Conrm with [MENU].
Assigning a DMX address
(patching)
Operating
26
DPX-620 III 6 Ch. Dimmer Inst.
dimmer pack