User manual

DANGER!
Hazardous voltage
Hazardous voltage may be present at cable ends and screw terminals.
The connection of screw terminals as well as all maintenance and repair work on
the electrical installation of the device must only be performed by qualied elec‐
trical personnel in volt-free condition. Failure to do so may result in electric shock
and risk of re and loss of life.
By all means you have to observe all electrical safety instructions applicable at the
place of operation.
The device is designed for mounting in 19" racks, it occupies two rack units (RU).
1. On the back of the device, open the required cable glands for the connecting cables to
the loads. Unused cable glands should remain closed for safety reasons.
2. Feed the connecting cables through the cable glands.
3. Connect the loads to the screw terminals according to the diagram below.
Electrical connection
Installation and starting up
DPX-620 III 6 Ch. Dimmer Inst.
17
dimmer pack