User manual

1. Press [MENU] to activate the main menu.
2.
Press or repeatedly until the ‘SETUP’ submenu is shown on the display.
3.
Press to select the ‘Fan Cooling’ submenu and conrm with [ENTER].
4.
Press or to select the desired option for the behaviour of the fan (display shows
‘Normal’ , ‘Silent’ , ‘Full On’ ).
5. Press [ENTER] to conrm the selection.
ð
The selected settings are adopted.
6. To exit the menu without making changes, press [ESC].
The ‘SETUP/Factory Default’ menu is used to reset the device to factory defaults.
1. Press [MENU] to activate the main menu.
2.
Press or repeatedly until the ‘SETUP’ submenu is shown on the display.
3.
Press to select the ‘Factory Default’ submenu and conrm with [ENTER].
ð
The display shows ‘Conrm’ .
Reset to factory defaults
Operating
DPX-1210T NET
41
dimmer pack