User manual

7. To exit the menu without making changes, press [ESC].
The ‘SETUP/DMX Failed’ menu is used to set how the device reacts when the DMX signal fails.
1. Press [MENU] to activate the main menu.
2.
Press or repeatedly until the ‘SETUP’ submenu is shown on the display.
3.
Press to select the ‘DMX Failed’ submenu and conrm with [ENTER].
4.
Press or to select the desired option for the behaviour of the device in the event of
ArtNET control failure.
5.
If you have chosen the ‘GoScene##’ option, press to activate the cursor and use or
to select a scene between 01 and 99.
6. Press [ENTER] to conrm the selection.
ð
The selected settings are adopted.
7. To exit the menu without making changes, press [ESC].
The ‘SETUP/Fan Cooling’ menu is used to adjust the fan.
Setting the behaviour on DMX
signal failure
Fan settings
Operating
40
DPX-1210T NET
dimmer pack