User manual

4.
Press to move the cursor to the number of the channel to which you want to assign
the control protocol.
5.
Press or to select either ‘D’ (DMX) or ‘A’ (ArtNET) and conrm with [ENTER].
ð
The control protocol for the selected channel is set.
The ‘SETUP/ArtNET Failed’ menu is used to set how the device reacts when the ArtNET signal
fails.
1. Press [MENU] to activate the main menu.
2.
Press or repeatedly until the ‘SETUP’ submenu is shown on the display.
3.
Press to select the ‘ArtNET Failed’ submenu and conrm with [ENTER].
4.
Press or to select the desired option for the behaviour of the device in the event of
ArtNET control failure.
5.
If you have chosen the ‘GoScene##’ option, press to activate the cursor and use or
to select a scene between 01 and 99.
6. Press [ENTER] to conrm the selection.
ð
The selected settings are adopted.
Setting the behaviour on ArtNet
signal failure
Operating
DPX-1210T NET
39
dimmer pack