User manual

6. Press [ENTER].
ð
The incoming DMX signal is saved as a scene under the set number. At the end of
the saving process, the scene numbering display automatically jumps to the next
higher number.
Scenes can be created and saved manually using the ‘SCENE REC/Assign’ menu.
1. Press [MENU] to activate the main menu.
2.
Press or repeatedly until the ‘SCENE REC’ submenu is shown on the display.
3.
Press to select the ‘Assign’ submenu and conrm with [ENTER].
4.
Press to move the cursor to the number of the channel whose value you want to
change.
5.
Press or to set the dimmer value of the channels of the selected scene (display
"01" ... ‘99’ / ‘FL’).
6. Press [ENTER].
ð
The set values are adopted. The display automatically jumps to the next scene.
7. To exit the menu without making changes, press [ESC].
Setting a scene manually
Operating
32
DPX-1210T NET
dimmer pack