User manual

1. Press [MENU] to activate the main menu.
2.
Press or repeatedly until the ‘LOCAL CONTROL’ submenu appears on the display
and activate the submenu with [ENTER].
ð
The set dimmer channel ashes.
3.
Press to move the cursor to the number of the dimmer channel (display shows ‘LIVE
123456789012’ ) whose parameters you want to change.
4.
Press or repeatedly until the display shows the desired value for the selected
dimmer channel.
5. Press [ESC] to exit the menu and return to display mode.
ð
The set value is applied.
Menu level 1 Menu level 2 Function
‘CURVES’ ‘Linear’ A linear dimmer curve is set.
‘Square’ A square dimmer curve is set.
‘NO-DIM’ Switch mode is activated. The
output power is 0% or 100%.
Setting the dimmer curve
Operating
DPX-1210T NET
29
dimmer pack