User manual

The ArtNET address is set via the ‘ADDRESS’ menu.
1. Press [MENU] to activate the main menu.
2.
Press or repeatedly until the ‘ADDRESS’ submenu is shown on the display.
3.
Press to select the ‘ArtNET’ submenu and conrm with [ENTER].
4.
Press to select the ‘SubNET:’ submenu for a subnet or the ‘Universe’ submenu for an
ArtNET universe and conrm with [ENTER].
5.
Press or repeatedly until the display shows the desired address for the subnet or the
Art-Net universe (display shows ‘000’ … ‘255’ ) and conrm with [ENTER].
ð
The ArtNET address is assigned to the selected SubNET or ArtNET universe.
6.3 Dimmer settings
The parameters of the selected dimmer channel are set via the ‘LOCAL CONTROL’ menu.
Setting the Art-Net address
Setting parameters of the
dimmer channel
Operating
28
DPX-1210T NET
dimmer pack