User manual

4. Press [ENTER] to activate the Cursor.
5.
Press or repeatedly until the display shows the desired DMX start address (display
shows ‘001’ … ‘512’ ) and conrm with [ENTER].
ð
The value is conrmed. The parent menu level is displayed.
6.
Press to select the ‘Patch:’ submenu for channel selection.
7. Press [ENTER] to activate the Cursor.
8.
Press to move the cursor between the elds ‘ Patch:’ for channel selection and
‘Start:’ for entering the start address.
9.
Press or repeatedly until the display shows the desired channel (display shows ‘01’
… ‘12’ ) or the desired start address (display shows ‘001’ … ‘512’ ) and conrm with
[ENTER].
ð
The DMX start address is assigned to the selected channel.
Operating
DPX-1210T NET
27
dimmer pack