User manual

6 Operating
1. Connect the device to the power supply.
ð
The [POWER] LED lights up. The display shows ‘Initialize...’ while the device is
starting up. The start sequence is nished when the current device settings are
shown on the display. The device is operational.
2. Switch on the required channels using the assigned circuit breakers.
3. To switch o the device, pull the mains plug from the 32 A CEE socket.
6.1 Main menu
1. Press [MENU] to activate the main menu.
2.
Press or repeatedly until the desired submenu is shown on the display.
3.
Press to scroll through the various options of the submenu or to move the cursor to
the right.
Turning the device on / o
Operating
24
DPX-1210T NET
dimmer pack