User manual

Set DIP switch 1 to [OFF] and switch 2 to [ON].
ð
The BACKUP mode is activated. If a DMX signal is present at input A, it is output at
the device output. If no DMX signal is present at input A, then the signal from input
B is output at the device output.
In MERGE mode, the DMX signals A and B are combined to form a new signal.
1. Set DIP switch 1 to [ON] and switch 2 to [OFF].
ð
The MERGE mode is activated.
2. Use the DIP switches 1 … 9 to set the DMX start address for the merged new signal.
Example: You want to merge the rst 6 channels of DMX signal A and all subsequent channels
of DMX signal B.
1. Set DIP switches 1, 2 and 3 to [OFF].
2. Set DIP switches 4 … 10 to [ON].
ð
The rst 6 channels of the DMX output signal are occupied by the 6 channels of the
DMX signal A. The channels 7 … 512 of the DMX output signal are occupied by the
channels of the DMX signal B.
Operating mode MERGE
Operating
24
DM-2512
DMX manager