User manual

6 Operating
6.1 Setting the operating modes
The device oers four dierent operating modes for combining several DMX signals: HTP,
Backup, Merge and LTP.
In HTP mode, the highest DMX value has priority.
Set DIP switches 1 and 2 to [ON].
ð
The HTP mode is activated. If two DMX signals are present at the inputs of the
device, then the signal with the higher value overwrites the other signal.
In BACKUP mode, the signal of the other input is accepted if no DMX signal is present at one
input.
Operating mode HTP (High Take
Precedence Modus)
Operating mode BACKUP
Operating
DM-2512
23
DMX manager