User manual DM-2512 DMX manager
Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 05.03.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
DM-2512 DMX manager
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Instructions The individual steps of an instruction are numbered consecutively. The result of a step is indented and highlighted by an arrow. Example: 1. Switch on the device. 2. Press [Auto]. ð Automatic operation is started. 3. Switch off the device.
General information 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided.
General information Warning signs Type of danger Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device is intended for merging multiple DMX signals, for distributing one DMX signal to multiple DMX chains and for the extension of a DMX chain. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions Safety DANGER! Danger for children Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke! Never let children unattended use electrical devices. DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present.
Safety instructions NOTICE! Risk of fire Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames.
Safety instructions NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specified in the chapter ‘Technical specifications’ of this user manual.
Safety instructions NOTICE! External power supply The device is powered by an external power supply. Before connecting the external power supply, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual cur‐ rent circuit breaker. Failure to do so could result in damage to the device and pos‐ sibly the user.
Features 3 Features DMX manager with the following features: n Four operating modes: HTP, Backup, Merge and LTP n 2 × 3-pin DMX input on the front panel, 2 × 3-pin DMX input on the rear panel (not usable in parallel) n 1 × 3-pin DMX output on the front panel, 1 × 3-pin DMX output on the rear panel (not usable in parallel) n 19" rack-mountable DM-2512 DMX manager 15
Installation and starting up 4 Installation and starting up Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. Create all connections while the device is off. Use the shortest possible high-quality cables for all connections.
Installation and starting up Connections in ‘DMX’ mode Connect the output of the first DMX device to the input of the second one and so on, to form a series connection. Connect the output of this DMX chain to input A on the front or back of the DMX Manager. Connect the output of a second DMX chain to input B on the front or back of the DMX Manager. Connect the output on the front or rear of the DMX Manager to the DMX input of a DMX controller or other DMX device.
Installation and starting up DMX indicator When the device and the DMX controller are operational, the DMX indicator in the display shows that a DMX signal is being received on the input. Rack mounting The unit has been designed for rack mounting in a standard 19" rack; it occupies one rack unit.
Connections and controls 5 Connections and controls Front panel DM-2512 DMX manager 19
Connections and controls 1 [POWER] Main switch. Turns the device on and off. 2 [POWER INDICATOR] Indicator LED for operating status. Lights up once the device is turned on. 3 [DMX INDICATOR] [A], [B] 2 × indicator LED for DMX input. The indicator LED of the respective channel lights up green as soon as a signal is present.
Connections and controls Rear panel DM-2512 DMX manager 21
Connections and controls 4 [DMX IN] 2 × DMX input, designed as XLR socket 5 [DMX OUT] 1 × DMX output, designed as XLR socket 6 DIP switches for setting the operating modes and DMX addresses 7 Connection for the plug-in power supply.
Operating 6 Operating 6.1 Setting the operating modes The device offers four different operating modes for combining several DMX signals: HTP, Backup, Merge and LTP. Operating mode HTP (High Take Precedence Modus) In HTP mode, the highest DMX value has priority. Set DIP switches 1 and 2 to [ON]. ð The HTP mode is activated. If two DMX signals are present at the inputs of the device, then the signal with the higher value overwrites the other signal.
Operating Set DIP switch 1 to [OFF] and switch 2 to [ON]. ð The BACKUP mode is activated. If a DMX signal is present at input A, it is output at the device output. If no DMX signal is present at input A, then the signal from input B is output at the device output. Operating mode MERGE In MERGE mode, the DMX signals A and B are combined to form a new signal. 1. Set DIP switch 1 to [ON] and switch 2 to [OFF]. ð The MERGE mode is activated. 2.
Operating Operating mode LTP (Latest Takes Precedence) In LTP mode, the last DMX value has priority. Set DIP switches 1 and 2 to [OFF]. ð The LTP mode is activated. If two DMX signals are present at the inputs of the device, then the last two changed values are applied.
Operating 6.
Operating DMX B Dip switch ON Start channel number 11 1, 2, 4 12 3, 4 13 1, 3, 4 14 2, 3, 4 15 1, 2, 3, 4 16 5 … … 511 1, 2, 3, 4, 5, 6, 7, 8, 9 DM-2512 DMX manager 27
Technical specifications 7 Technical specifications Operating modes HTP, Backup, Merge, LTP Control DIP switches Input connections DMX signal input, front panel 2 × XLR chassis socket, 3-pin DMX signal input, rear panel 2 × XLR chassis socket, 3-pin DMX signal output, front panel 1 × XLR chassis socket, 3-pin DMX signal output, rear panel 1 × XLR chassis socket, 3-pin Output connections Voltage supply Plug-in power supply (9 V Installation 19", 1 RU Dimensions (W × H × D) 482 mm × 44 m
Technical specifications Further information Type Merger Type of distribution 2in1 RDM compatible No WDMX-capable No DM-2512 DMX manager 29
Plug and connection assignments 8 Plug and connection assignments Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment so that a perfect light experience is guaranteed.
Protecting the environment 9 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes 32 DM-2512 DMX manager
Notes DM-2512 DMX manager 33
Notes 34 DM-2512 DMX manager
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
