Data Sheet

z
DocID: 490816_19.01.2022
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • Germany • www.thomann.de
Features
 DMX and RDM splitter for installation applications
 6 × optically isolated outputs
 Compact metal housing
 Terminable DMX / RDM thru
 EU safety plug with xed cable
Technical specications
 Input connections
DMX / RDM input
and thru: 3-pin terminal
 Output connections: 6×3-pin terminal
 Control protocols: DMX-512/RDM
 Supply voltage: 100–240V~, 50/60Hz
 Power consumption: 7.5W max.
 Fuse: 5mm×20mm,
1A, 250V, fast-acting
 Mounting options: wall mounting
 Dimensions (W×H×D): 232×47×158mm
 Weight: 1.24kg
 Ambient conditions
Temperature range: 0 °C…40 °C
Relative humidity: 20 %…80 %
(non condensing)
Safety instructions
Intended use
This device is meant to be used to distribute one DMX/RDM signal to
up to six units. Any other use or use under other operating conditions is
considered to be improper and may result in personal injury or proper-
ty damage. No liability will be assumed for damages resulting from improper use.
Dangers for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard! Ensure that children
do not detach any small parts (e.g. knobs or the like) from the unit. They could
swallow the pieces and choke! Never let children unattended use electrical de-
vices.
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt,
and strong vibrations.
Protecting the environment
For the transport and protective packaging, environmentally friendly
materials have been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of. Do not
just dispose of these materials with your normal household waste, but make
sure that they are collected for recycling. Please follow the notes and markings
on the packaging.
This product is subject to the European Waste Electrical and Electronic
Equipment Directive (WEEE) in its currently valid version. Do not dispose
of your old device with your normal household waste. Dispose of this
product through an approved waste disposal rm or through your local
waste facility. Comply with the rules and regulations that apply in your country.
If in doubt, consult your local waste disposal facility.
EN
DD-6 RDM WM | DMX / RDM-Splitter