User manual
Table Of Contents
- Table of contents
- 1 General notes
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 MIDI and DMX channel settings
- 9 Quick Start Guide for the main functions
- 10 Technical specifications
- 11 Plug and connection assignments
- 12 Protecting the environment
36 [POWER]
Turns the device on and o.
37 [DC IN]
Power supply port.
38 [MIDI THRU/OUT/IN]
‘MIDI’ ports to connect a sequencer or MIDI device.
39 [DMX OUT]
This terminal sends DMX signals to DMX capable devices. Use a cable with 3-pin XLR connector to connect the
devices.
40 [AUDIO]
At this input, an audio signal with a level of 100 mV to 1 V can be connected.
41 [REMOTE]
‘Black out’ and ‘Full on’ can also be activated via a remote control. Please use a 1/4" jack plug (stereo) for connec‐
tion.
42 [FOG MACHINE]
A fog machine can be connected to this input.
Rear panel
Connections and controls
16
DMX DC-2448
DMX controller