User manual
Table Of Contents
- Table of contents
- 1 General notes
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 MIDI and DMX channel settings
- 9 Quick Start Guide for the main functions
- 10 Technical specifications
- 11 Plug and connection assignments
- 12 Protecting the environment
30 [AUDIO LEVEL]
With [AUDIO LEVEL] to set the Audio sensitivity.
31 [BLIND]
This button is used to temporarily remove individual channels from a running programme.
32 [HOME]
This key is used to end the Blind mode.
33 [TAP SYNC]
If the device is in ‘Run’ mode, you can manually set the operating speed with [TAP SYNC] . Pressing this button
twice sets the speed.
34 [FULL ON]
Sets all DMX values to [255].
35 [BLACK OUT]
Sets all DMX values at the output to [000].
Connections and controls
DMX DC-2448
15
DMX controller