User manual

17 [MODE SELECT/REC SPEED]
With [Mode Select] you can select between these three modes:
n CHNS〈 〉SCENES
n A DOUBLE PRESET B
n 1-12 SINGLE PRESET
With [Rec Speed] to adjust the speed of all programmes in ‘Mix’ mode.
18 [PAGE / REC CLEAR]
Switches between the four PAGES (banks).
19 [ADD KILL/REC EXIT]
In [ADD] , several scenes or ash buttons are active.
In [KILL] , pressing a ash button disables any other scene or programme.
With [REC EXIT] to quit the Edit mode.
20 [RECORD/SHIFT]
[RECORD] is used to start the Record mode or to programme a Stop.
[SHIFT] is only used in conjunction with other buttons.
21 [MASTER A]
Sets the intensity of Master A to 100 % for as long as the button is pressed.
22 [PARK]
In CHNS〈 〉SCENES mode, you can switch between single-chase or mix-chase mode.
In Single-chase mode, the activated programmes run one after the other. In Mix-chase mode, the activated pro‐
grammes run simultaneously.
23 [HOLD]
Freezes all current DMX values at the output.
24 [STEP]
This button is used to move to the next step if [SPEED] is at the lowest setting or Edit mode is activated.
25 [AUDIO]
Enables the audio mode.
26 [MASTER A]
Master fader for channels 1-24.
27 [MASTER B]
Master fader for channels 25-48.
28 [FADE]
With [FADE] to set the fade time.
29 [SPEED]
With [SPEED] to set the Chase speed.
Connections and controls
14
DMX DC-2448
DMX controller