User manual

With this function, you can run a bank of scenes in an endless loop.
1. Make sure that the device is in manual mode. Press [Auto/Del]to enable the Auto mode.
The LED [Auto trigger] in the display indicates that the mode is active.
2. With [BANK UP/DOWN] to select a bank with scenes for the run.
3. Use [Tapsync/Display] or the fader [SPEED] to adjust the running speed.
Use the fader [FADE TIME] to set the fade time.
4. Press [Auto/Del] again to exit the mode.
1. Press [Music/Bankcopy] to enable the sound control. The LED [Music trigger] in the dis‐
play indicates that the mode is active.
2. Use [BANK UP/DOWN] to select the desired bank. The scenes are now running in an end‐
less loop according to the rhythm of the music which the device perceives via the built-
in microphone.
3. Use the fader [FADE TIME] to set the fade time.
4. Press [Music/Bankcopy]to exit the mode.
Auto mode
Sound control
Operating
DC-1216
37
DMX controller