User manual

1. Enabling programming mode.
With [Tapsync/Display] you can switch between dierent display masks. Press
[Tapsync/Display] to display the chase and the current step. Press [Tapsync/Display] again
to display the scene and the bank.
2. Select the Chase, you want to add a step to.
3. Press [Tapsync/Display]to display the chase and the current step.
4. Use [BANK UP/DOWN] to select the step to which you want to add a step.
5. Press [Midi/Rec] to add a new step.
Use [BANK UP/DOWN] and [SCENES] to select the desired new scene from a bank.
6. Press [Midi/Rec].
ð
The selected scene is inserted as a new step at the desired location. All subsequent
scenes are moved one step backward.
Adding step
Operating
34
DC-1216
DMX controller