User manual

1. Enabling programming mode.
2. Select a chase with [CHASE 1 – 6] .
3. Use [BANK UP/DOWN] to select the bank with the scenes to be copied.
4. Press [Music/Bankcopy].
5. Press [Midi/Rec].
ð
The scenes are copied to the chase in the order they are placed. All LEDs ash to
conrm.
If the bank selected in step 3 contains non-programmed scenes, they will be saved to
the chase as empty scenes.
Storing an entire bank to a
chase
Operating
DC-1216
33
DMX controller