User manual

1. Disconnect the unit from the power supply.
2. Simultaneously press [Program] and [BANK DOWN] and keep the buttons pressed.
3. Reconnect the device to the power supply while keeping [Program] and [BANK DOWN]
pressed simultaneously.
ð
All stored scenes are being deleted. All DMX values of all scenes are set to zero.
1. Enabling programming mode.
2. Use [BANK UP/DOWN] to select the bank to be copied.
3. Press [Midi/Rec].
4. Use [BANK UP/DOWN] to select the bank to be copied to.
5. Press [Music/Bankcopy]. All LEDs will ash and thus conrm the copying of the Bank.
6. Press [Program] to exit the programming mode.
Deleting all scenes
Copying bank
Operating
DC-1216
31
DMX controller