User manual

9. Once the programming is completed, press [Program] for three seconds. The LED [PROG]
goes out in the display and indicates that you have quit the programming mode. After
exiting, the [BLACK OUT] function is automatically activated.
1. Enabling programming mode.
2. Use [BANK UP/DOWN] to select the bank with the scene you want to alter.
3. Use [SCENES] to select the desired scene.
4. Use the faders to make the desired changes.
5. Press [Midi/Rec] to save the settings.
6. Press the respective [SCENES] button to overwrite the former scene.
Make sure that you select the same scene in steps 3 and 6 to avoid accidentally over‐
writing the wrong scene!
Altering scenes
Operating
DC-1216
29
DMX controller