User manual

7 Operating
7.1 Introduction
With the DC-1216, you can control up to twelve devices with up to 16 DMX channels per
device. 30 banks with each eight programmable scenes are available as program memory. You
can programme six chases, each with up to 240 programmed scenes.
7.2 Enabling programming mode
As soon as you connect the unit to the power supply, the manual mode will be automatically
activated. To switch to the programming mode, press [Program] for three seconds. The LED
[PROG] in the display will start ashing, thus indicating that you are now in programming
mode. In programming mode, you can program scenes and chasers.
Operating
DC-1216
27
DMX controller