User manual

1 [SCANNERS]
12 scanners with 16 DMX channels and fader control
Press one of the scanner buttons to turn on the manual fader control. Press the scanner button again to turn it o.
The LED next to the button lights up or goes out to indicate your selection. For channel assignment, see table below.
2 [SCENES]
Scene buttons
Press one of the Scene buttons to load or save scenes. A maximum of 240 scenes can be saved.
3 Fader
Use these knobs to control the intensity of channels 1-8 or 9-16, depending on whether Page A or B is selected.
4 Display
5 [Program]
Enables the Programme mode
6 [BANK]
Press the Up / Down buttons to choose from 30 banks.
Connections and controls
DC-1216
19
DMX controller