Data Sheet
Thomann GmbH 
Hans-Thomann-Straße 1 • 96138 Burgebrach 
Germany • www.thomann.de
DocID: 391390_29.11.2017
EN
Controller LED X-Dimmer 1 Pro  LED dimmer
Safety instructions
Intended use
This device is intended for use as a professional LED dimmer with DMX 
and manual control. Any other use or use under other operating con-
ditions is considered to be improper and may result in personal injury 
or property damage. No liability will be assumed for damages resulting 
from improper use.
Dangers for children
Ensure that plastic bags, packaging, etc. are disposed of properly and 
are not within reach of babies and young children. Choking hazard! 
Ensure that children do not detach any small parts (e.g. knobs or the 
like) from the unit. They could swallow the pieces and choke! Never let 
children unattended use electrical devices.
Operating conditions
This device has been designed for indoor use only. To prevent damage, 
never expose the device to any liquid or moisture. Avoid direct sun-
light, heavy dirt, and strong vibrations.
Protecting the environment
For the transport and protective packaging, environmentally friendly 
materials have been chosen that can be supplied to normal recycling. 
Ensure that plastic bags, packaging, etc. are properly disposed of. Do not 
just dispose of these materials with your normal household waste, but 
make sure that they are collected for recycling. Please follow the notes 
and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic 
Equipment Directive (WEEE) in its currently valid version. Do not dispose 
of your old device with your normal household waste. Dispose of this 
product through an approved waste disposal rm or through your local 
waste facility. Comply with the rules and regulations that apply in your 
country. If in doubt, consult your local waste disposal facility.
Features
  Professional dimmer for single colours and white
  Control via DMX and 0–10V analogue
  TV-ready
  Manual programme selection via dipswitch
  2 connections for LED Stripes
Technical specications
  Protocoll  DMX 512
  Number of DMX channels  1
  Voltage  12/24V
  Current out     72W/144W, max. 6A
  Dimensions (W/H/L)  40×20×90mm
  Weight  0.05kg
ö
%
#
$
&
1 DMX input for connection to a DMX controller.
2 DMX output for connecting additional DMX devices.
3 Terminals for connecting the operating voltage.
4 Terminals for connecting the analogue control.
5 2 outputs for connecting the LED load.

