User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Basics
- 8 Operating
- 9 Technical specifications
- 10 Plug and connection assignment
- 11 Protecting the environment
4. Hold down [FIXTURE] and then press that [FIXTURE] button to which you want to copy
the same settings.
8.6 Fade time
1. Press [MODE] and then [Tap/Disp]. The display now shows ‘ONLY’ or ‘ALL’ for 3 seconds,
depending on the current settings. ‘ONLY’ indicates that only the pan / tilt channels are
controlled by the [FADE TIME] fader. ‘ALL’ indicates that all channels are changed by the
fader.
2. To switch between ‘ONLY’ and ‘ALL’ , hold down [MODE] and press [Tap/Disp].
Operating
DMX DC-192
47
DMX controller