User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Basics
- 8 Operating
- 9 Technical specifications
- 10 Plug and connection assignment
- 11 Protecting the environment
8.4.4 Playing chases
1. When you turn on the controller, it starts by default in Manual / Blackout mode. All
output values are blanked out. To show the values, press [Blackout]. To determine the
respective blackout status, there is an indicator in the display that ashes when acti‐
vated and shows ‘OFF’ when deactivated. Press [Blackout] to stop the display from
ashing.
2. Press the [CHASE] button (1 to 12) of the scene you want to play. The corresponding LED
lights up.
3.
Press [Bank] / [Bank] to manually go through the chase steps. You can also use the
fader [FADE TIME] if you want to have a cross fade between the steps.
4. Repeat steps 2 and 3 to manually play additional scenes.
1. Press [Auto/Del]. The indicator for automatic playback in the display lights up.
2. Press the [CHASE] buttons of the chases you want to play. The corresponding LED lights
up and playback starts. You can choose more than one chase at a time to create a chase
sequence.
Manual playback
Automatic playback
Operating
44
DMX DC-192
DMX controller