User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Basics
- 8 Operating
- 9 Technical specifications
- 10 Plug and connection assignment
- 11 Protecting the environment
1. Keep [Program] pressed for about two seconds or until the PROG indicator ashes on the
display. When the indicator ashes, the recording mode is active and you can release the
button.
2. To select a chase press the corresponding [CHASE] button (1 to 12). The corresponding
LED lights up.
3. Hold down [Auto/Del] and additionally press that [CHASE] button that you have selected
in step 2. When the chase is deleted, all LEDs ash three times.
4. Repeat steps 2 and 3 to delete further chases.
5. Keep [Program] pressed for about two seconds or until the PROG indicator stops ashing
on the display. As soon as the blackout indicator ashes, the programme mode is deacti‐
vated.
1. Turn o the controller using the mains switch.
2.
Simultaneously hold down [Program] and [Bank] and switch the controller back on
again. All LEDs ash three times when all chases have been deleted.
Deleting chase
Deleting all chases
Operating
DMX DC-192
43
DMX controller