User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Basics
- 8 Operating
- 9 Technical specifications
- 10 Plug and connection assignment
- 11 Protecting the environment
8.4.2 Recording a scene bank on a chase
1. Keep [Program] pressed for about two seconds or until the PROG indicator ashes on the
display. When the indicator ashes, the recording mode is active and you can release the
button.
2. To select a chase press the corresponding [CHASE] button (1 to 12). The corresponding
LED lights up.
3.
Use [Bank] / [Bank] to select a scene bank you want to add to the chase. You can see
the scene bank in the display by looking at the digits on the right outer side.
4. Simultaneously press [Music/Bkc] and [Midi/Rec] to include the entire scene bank. When
the scene bank is included, all LEDs ash three times. Scenes are being included in the
same order in which they are stored in the scene bank.
5. Repeat steps 3 and 4 to include further scene banks.
6. Keep [Program] pressed for about two seconds or until the PROG indicator stops ashing
on the display. As soon as the blackout indicator ashes, the programme mode is deacti‐
vated.
Operating
40
DMX DC-192
DMX controller