User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Basics
- 8 Operating
- 9 Technical specifications
- 10 Plug and connection assignment
- 11 Protecting the environment
4. Repeat steps 2 and 3 to play additional scenes.
1. Press [Auto/Del]. The indicator for automatic playback in the display lights up.
2.
Press [Bank] / [Bank] to select a desired scene bank for automatic playback. All eight
scenes of the selected scene bank are now played one after the other.
3. Using the faders [SPEED] and [FADE] you can adjust the scene playback. You can also
[Tap/Disp] twice to set a number of sequences. The number depends on the bar in which
you press [Tap/Disp]. Press again [Auto/Del] to exit the automatic playback mode.
8.3.7 Audio playback
1. Press [Music/Bkc]. The indicator for automatic playback in the display lights up.
2.
Press [Bank] / [Bank] to select a desired scene bank (1 to 30) or press a [CHASE]
button (1 to 12). The selected scene bank or chase will start synchronously with the
audio playback of the internal microphone or the connected line level input. Press again
[Music/Bkc] to exit the audio mode.
Automatic playback
Operating
38
DMX DC-192
DMX controller