User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Basics
- 8 Operating
- 9 Technical specifications
- 10 Plug and connection assignment
- 11 Protecting the environment
8.3.4 Deleting a scene
1. Keep [Program] pressed for about two seconds or until the PROG indicator ashes on the
display. When the indicator ashes, the recording mode is active and you can release the
button.
2.
Use [Bank] / [Bank] to select the scene bank that contains the scene you want to
delete.
3. Keep [Auto/Del] and simultaneously press the [SCENE] button (1 to 8) of the scene you
want to delete. All LEDs ash three times when the scene has been deleted.
4. Repeat steps 2 and 3 to delete further scenes.
5. Keep [Program] pressed for about two seconds or until the PROG indicator stops ashing
on the display. As soon as the blackout indicator ashes, the programme mode is deacti‐
vated.
Operating
36
DMX DC-192
DMX controller