User manual
Table Of Contents
- Table of contents
- 1 General notes
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 MIDI and DMX channel settings
- 9 Quick Start Guide for the main functions
- 10 Technical specifications
- 11 Plug and connection assignments
- 12 Protecting the environment
8.1.4 Sending MIDI le
1.
Activate the programming (
Ä
Chapter 7.1.1 ‘Enabling programming’
on page 16).
2. Keep [RECORD] pressed.
3. Press [FLASH 4] three times.
ð
The display shows ‘OUT’ .
The controller can now send MIDI les.
During the data exchange, no other functions are available. The
functions are automatically available again as soon as the data
exchange is complete.
The data exchange is interrupted as soon as errors occur or the
device is switched o.
8.1.5 Implementation
n During the reception and transmission of MIDI les, all automatically running
MIDI scenes and channels are stopped for 10 minutes .
n While receiving and sending MIDI data, the device automatically searches for or
sends an ID of 55H(85), a le named DC1224 with the addition BIN(SPACE).
n Data can be transferred to another device or to a MIDI device.
n There are two dierent ways to transfer data.
MIDI and DMX channel settings
24
DMX DC-1224
DMX controller