User manual
Table Of Contents
- Table of contents
- 1 General notes
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 MIDI and DMX channel settings
- 9 Quick Start Guide for the main functions
- 10 Technical specifications
- 11 Plug and connection assignments
- 12 Protecting the environment
7.2.2 Erasing programme
1.
Activate the programming (
Ä
Chapter 7.1.1 ‘Enabling programming’
on page 16).
2. Use [PAGE] to select the page where the programme to be erased is stored.
3. Keep [RECORD] pressed and press twice the respective [FLASH] button [13-24].
4. Release both buttons.
ð
All LEDs ash briey.
The programme is erased.
7.2.3 Deleting all programmes
1.
Activate the programming (
Ä
Chapter 7.1.1 ‘Enabling programming’
on page 16).
2. Keep [RECORD] pressed.
3. Press [FLASH 1], [FLASH 4], [FLASH 2] and [FLASH 3] successively.
ð
All LEDs light up.
All programmes are deleted.
7.2.4 Deleting scenes
1.
Activate the programming
Ä
Chapter 7.1.1 ‘Enabling programming’ on page 16.
2. Record one or multiple scenes.
3. If you are not satised with one or more scenes, press [REC CLEAR] while
keeping [RECORD] pressed.
ð
All LEDs light up.
All scenes in the memory are deleted.
7.2.5 Deleting a single or multiple steps
1.
Activate the programming (
Ä
Chapter 7.1.1 ‘Enabling programming’
on page 16).
2. Keep [EDIT] pressed and then simultaneously press the respective
[FLASH]button.
3. Press [STEP] until you have reached the step you want to delete.
Operating
DMX DC-1224
19
DMX controller