User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation and starting up
- 5 Connections and controls
- 6 Operating
- 7 Technical specifications
- 8 Protecting the environment
6.9 Factory defaults
To unlock, press and hold [P] and [B] simultaneously for about ten seconds.
ð
The LEDs of all buttons ash briey once. All settings and the saved scenes are set to
the default values. The user-specic settings are deleted. The fade time for switching
on the device and for changing the colour is set to 2 s.
6.10 Data transfer
Up to 32 ART-4 or ART-9 DMX controllers can be networked and controlled with each other.
1. Press and hold [C], [B], [S] and [P] simultaneously for ve seconds.
ð
The LEDs of the [C], [B], [S] and [P] buttons ash. The device is ready for data transfer.
2. Press [S] to transfer the data of the current device to the connected devices.
ð
The LEDs of the [C], [B], [S] and [P] buttons light up consecutively. This process can
take up to ten seconds.
Operating
ART-4 RGBW / ART-9 RGBW
35
DMX controller