User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation and starting up
- 5 Connections and controls
- 6 Operating
- 7 Technical specifications
- 8 Protecting the environment
6.5.4 Fade time
1. Press and hold [C] for ve seconds.
ð
The LEDs of all buttons ash briey once.
2. Release [C].
ð
The [C] button LED ashes.
3. Press one of the number buttons or [C], [B], [S] or [P] to dene the fade time for the
colour change.
The following table shows the possible settings on that.
ART-4 RGBW Button 1 2 3 4 [C] / [B] / [S] / [P]
Fade time 1 s 2 s 3 s 4 s 0 s (no fade time)
ART-9 RGBW Button 1 2 3 9 [C] / [B] / [S] / [P]
Fade time 1 s 2 s 3 s 9 s 0 s (no fade time)
ð
The LEDs of all buttons ash briey once. The setting has been accepted.
Operating
30
ART-4 RGBW / ART-9 RGBW
DMX controller