User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation and starting up
- 5 Connections and controls
- 6 Operating
- 7 Technical specifications
- 8 Protecting the environment
3. Select one of the number buttons to which you want to save the colour and hold it
down for at least two seconds.
ð
The LEDs of all buttons ash briey once. The colour and brightness settings were
saved on the number buttons.
4. Repeat steps 1 through 3 to save additional colours.
6.5.3 Rendering colour setting
1. Press and hold [C] for one second to call up the colour setting menu.
2. Select one of the number buttons to render the colour stored to it.
ð
The [C] button LED lights. The stored colour is rendered.
Operating
ART-4 RGBW / ART-9 RGBW
29
DMX controller