User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation and starting up
- 5 Connections and controls
- 6 Operating
- 7 Technical specifications
- 8 Protecting the environment
6.4 Run duration
1. Press and hold [S] for one second to call up the programme run duration menu.
ð
The [S] button LED lights. There is a click sound.
2. Use the touch dial to set the run duration for the built-in colour programmes from 0.2
seconds … ten minutes. Turn the touch control clockwise to increase the duration, coun‐
terclockwise to decrease the duration.
If you turn the touch dial for up to ten minutes, you will no longer hear a click and the
number keys will ash. You can now set the run duration using the number buttons.
The following table shows the possible settings on that.
ART-4 RGBW Button 1 2 3 4
Run duration 10 min 20 min 30 min 40 min
ART-9 RGBW Button 1 2 3 9
Run duration 10 min 20 min 30 min 90 min
Operating
ART-4 RGBW / ART-9 RGBW
27
DMX controller