User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation and starting up
- 5 Connections and controls
- 6 Operating
- 7 Technical specifications
- 8 Protecting the environment
6 Operating
The device automatically returns to normal operation after each adjustment.
During operation using the touch dial, click tones sound until the respective minimum or max‐
imum values are reached.
6.1 Turning the device on / o
1. Connect the device to the power supply.
ð
The LED of the button is lit. The device switches on and starts the last saved set‐
ting.
2.
Press and hold for two seconds to put the device to Standby mode.
ð
The outputs are o.
3.
Press and hold for two seconds to turn the device back on again.
Operating
ART-4 RGBW / ART-9 RGBW
23
DMX controller