User manual

8 Troubleshooting
In the following we list a few common problems that may occur during operation. We give you
some suggestions for easy troubleshooting:
Symptom Remedy
The unit does not work Check the mains connection.
No response from the connected devices 1. Check whether the conguration of the DMX controller matches the congu‐
ration of the connected devices.
2. Check whether the DMX cables are correctly connected to the 3-pin termi‐
nals. Note the device label.
3. Check whether the DMX cables run near or parallel to high-voltage cables
that may cause damage or interference to a DMX interface circuit.
Troubleshooting
36
ART-6 Fade
DMX controller