User manual

6.3.2 Setting the Fade time
In recording mode, you can set the fade time for the saved scenes.
1. Press and hold the button of the desired scene [SC1]…[SC6] to select the scene for which
you want to set the fade time.
ð
The status LED ashes.
2. Set the fade time of the scene to max. 600 seconds with [Master/Fade] while keeping the
button of the desired scene [SC1]…[SC6] pressed.
3. To save the fade time, release the button of the selected scene [SC1]…[SC6].
ð
The status LEDs of the buttons [SC1]…[SC6] ash three times. The fade time has
been saved.
4. Repeat steps 1… 3 to save the fade time for further scenes.
When you have saved the fade time for all scenes, move [Master/Fade] back to the
original position.
Operating
30
ART-6 Fade
DMX controller