User manual

6.3 Functions in stand-alone operation
Set DIP switch 10 to the ‘OFF’ position to activate stand-alone operation.
6.3.1 Recording scenes.
1. Hold down [Power/Program] for three seconds.
ð
The status LED ashes red. The recording mode is activated.
2. Press the button of the desired scene [SC1]…[SC6] to which you want to save the scene.
The associated status LED ashes repeatedly.
3. Set the corresponding channel fader [CH1]…[CH6] between 0 and 10 to select the
desired level of a single step of the scene.
Operating
28
ART-6 Fade
DMX controller